Home » Water Damage Restoration

Mold Remediation & Water Damage Restoration In Kalispell, MT

From complete mold remediation to emergency water damage restoration — Wrangler Construction handles the full job, start to finish, across the Flathead Valley.

When disaster strikes, you need a restoration company that you can rely on to respond quickly and efficiently.

When water gets into your home — from a burst pipe, a flooded basement, or a leaking roof — the clock starts immediately. Within 24 hours, moisture begins working into walls, subfloor, and framing. Within 72 hours, mold can establish itself. The longer you wait, the more expensive the recovery.

Wrangler Construction responds fast, assesses the full scope of damage, and handles everything from water extraction and drying through structural repairs and finished reconstruction. As a licensed general contractor, we don’t just mitigate — we rebuild. One call, one contractor, one completed project.

We serve Kalispell, Whitefish, Columbia Falls, Bigfork, Polson, Lakeside, and communities throughout Flathead County.

Our Water Damage & Mold Remediation Services

At Wrangler Construction, we offer a wide range of disaster restoration services tailored to meet the needs of residential and commercial properties across Montana. As experienced disaster restoration specialists, we’re equipped to handle every aspect of the restoration process, from initial damage assessment to final repairs.

Water Damage Restoration

Standing water and moisture damage need to be addressed before they become structural problems. We remove water, deploy industrial drying equipment, and monitor moisture levels throughout your home until the structure is fully dry.

Emergency water extraction
Structural drying and dehumidification
Moisture mapping and monitoring
Burst pipe and flood damage
Crawl space and basement water intrusion

Mold Remediation

Mold remediation in the Flathead Valley is a year-round issue — Montana’s freeze-thaw cycles, spring snowmelt, and older home construction create the conditions mold needs to take hold. We identify affected areas, contain the spread, remove contaminated materials, and treat surfaces to prevent recurrence.

Mold inspection and assessment
Containment and air filtration
Safe removal of mold-affected materials
Surface treatment and sanitization
Black mold removal
Crawl space and attic mold remediation
Post-remediation testing recommendations

Fire & Smoke Damage Restoration

We also handle fire and smoke damage cleanup, including soot removal, deodorization, and structural repairs after a fire event.

Storm & Wind Damage

Montana weather is unpredictable. When a storm damages your roof, siding, or structure, Wrangler steps in to secure and restore your property quickly.

Wrangler Is Different

Why Wrangler Construction For Restoration Work?

Most restoration companies handle the cleanup and hand you off to a separate contractor for the rebuild. That means two contracts, two schedules, and you managing the coordination between them during one of the most stressful situations a homeowner faces.

Wrangler is a licensed general contractor. We do both.

After water damage or mold remediation is complete, we handle the reconstruction — drywall, flooring, cabinetry, paint, structural work — so your home gets back to normal without the handoff gap. One point of contact from the first call to the final walkthrough.

Licensed general contractor — mitigation through full rebuild
Serving the Flathead Valley for residential and commercial properties
Transparent assessments — we tell you what's damaged and what it will take to fix it
We work with your insurance company and can support the documentation process

Our Restoration & Remediation Process

How a Restoration & Remediation Project Works

Step 1 — Assessment

We inspect the affected area, identify the source of moisture or damage, and document the scope — including areas that may not be visibly damaged but are at risk.

Step 2 — Mitigation

Water is extracted, drying equipment is deployed, and containment is established for any mold-affected areas. We stop the damage from spreading before anything else.

Step 3 — Remediation

Mold-affected materials are safely removed. Surfaces are treated. Air quality is addressed. We follow established remediation protocols to ensure the affected area is genuinely clean — not just visibly clean.

Step 4 — Estimate & Insurance Submittal

Once the scope of damage is clear, we prepare a detailed, professional estimate and submit it to your insurance company. Our estimates are prepared to insurance industry standards — the same format and methodology insurance adjusters use internally — which reduces back-and-forth and helps move your claim forward without unnecessary delays.

We also communicate directly with your adjuster on your behalf throughout this process. Insurance claims can go sideways when homeowners navigate adjusters on their own, often without realizing it. We step in as your point of contact to make sure the documentation is accurate, the communication is clear, and nothing inadvertently complicates your settlement.

Step 5 — Reconstruction

This is where most restoration companies stop. Wrangler doesn’t. We rebuild what was damaged — from structural framing to finished surfaces — so your home looks and functions the way it did before.

Step 6 — Final Walkthrough

We walk through the completed work with you before we consider the job done.

Frequently Asked Questions

Common Questions About Water Damage & Mold Remeditation

How quickly does mold grow after water damage?

Mold can begin developing within 24–72 hours of water exposure, depending on temperature and humidity. In Montana homes, especially those with crawl spaces or older insulation, conditions for mold growth can develop quickly. The sooner you address water damage, the lower the risk of a mold problem developing.

Does homeowners insurance cover water damage and mold remediation?

Most standard homeowners policies cover sudden and accidental water damage — a burst pipe, for example — but may exclude flooding, gradual leaks, or maintenance-related damage. Mold coverage varies by policy.

Wrangler handles the insurance side on your behalf. We prepare professional estimates in the format insurers expect and communicate directly with your adjuster to keep the claim moving. One of the most common ways homeowners accidentally complicate their own claims is by dealing with adjusters without guidance — we help you avoid that. We recommend contacting your insurer as soon as damage is discovered, then calling us.

Can I stay in my home during mold remediation?

It depends on the extent of the affected area and the type of mold involved. For small, contained areas, staying in the home may be possible. For larger remediation projects involving significant mold growth or structural materials, temporary relocation may be safer. We’ll be straightforward with you about what the situation calls for.

What's the difference between mold removal and mold remediation?

Mold removal refers to physically removing mold from surfaces. Mold remediation is a broader process that includes identifying the source of moisture, containing the affected area, removing contaminated materials, treating surfaces, and addressing the conditions that allowed mold to grow in the first place. Remediation is the standard professionals use — removal alone doesn’t address the root cause.

How long does the restoration process take?

Timeline depends heavily on the scope of damage. Water extraction and initial drying typically takes 3–5 days. Mold remediation varies based on the size of the affected area. Reconstruction timelines depend on what needs to be rebuilt. We give you a clear timeline estimate after the initial assessment and communicate any changes as the project progresses.

Do you serve areas outside of Kalispell?

Yes. We serve all communities in the Flathead Valley — Whitefish, Columbia Falls, Bigfork, Polson, Lakeside, Somers, Evergreen, and surrounding areas in Flathead County — and also serve the Missoula area, including Frenchtown, Lolo, East Missoula, and Bonner.

What Other Services Do You Provide?

In addition to water damage restoration and mold remediation, Wrangler Construction is a licensed general contractor serving the Flathead Valley and Missoula area. We handle residential remodeling — kitchen remodels, bathroom renovations, additions, and whole-home renovations — as well as general contracting for broader construction projects. Because we operate as a full general contractor, we can also manage the reconstruction phase after a restoration job without handing you off to a separate builder. One contractor through the entire process.

Serving the Flathead Valley & Western Montana

Wrangler Construction provides water damage restoration and mold remediation throughout northwest Montana, including:

Kalispell · Whitefish · Columbia Falls · Bigfork · Polson · Lakeside · Somers · Evergreen · Marion · Hungry Horse · West Glacier · Flathead County · Missoula · Frenchtown · Lolo · East Missoula · Bonner

Don't Wait — Water & Mold Damage Gets Worse Fast

If your home or property has water damage or suspected mold, the best time to call is now. Wrangler Construction will assess the situation honestly, give you a clear picture of what’s needed, and handle the work from start to finish.

Serving Kalispell, Whitefish, Columbia Falls, Bigfork, and communities across the Flathead Valley and Missoula area.